New Inglese EFI systems have all the flash of classic Weber induction but provide higher state of tune and engine performance versatility

The new Inglese EFI Induction Systems offer the look of classic Weber induction, and deliver crisp EFI performance with systems capable of supporting up to 1000 hp. These systems employ FAST XFI electronics, Dual-Sync Distributors and Precision-Flow Fuel Injectors integrated into precision cast aluminum 50mm IDA throttle bodies. Best of all, with an Inglese EFI system camshaft choice is greatly broadened allowing precise targeting of the desired horsepower and torque RPM range– something not possible with standard Weber carbureted engines. Inglese EFI Induction Systems can are also available without the FAST XFI engine controls and distributors for use with existing EFI engine controllers.

Inglese EFI systems feature an aircraft-quality hex aluminum linkage designed to provide trouble free actuation. The manifold uses custom-engineered, low-profile fuel feed rails that sit below the stacks and between the throttle bodies. This amazing system is engineered to deliver trouble-free service under normal heat environments and avoid the common binding found with many inferior systems.

To properly design the Inglese EFI system that’s right for your engine, follow four simple steps. First, choose the “base kit” determined by the type of engine you have (base kit will include the intake manifold, throttle body assembly and complete FAST XFI kit and Dual-Sync Distributor). Next, choose the correct injector size for your system based on the targeted horsepower to be achieved. Third, select the size and finish of the velocity stacks and finally, the proper fuel pump kit. We can provide invaluable guidance in the selection of these components.

Click here for more information from the 2009 Inglese catalog (page 4)

Click here for more information from the 2009 Inglese catalog (page 5)

 

 

Inglese EZ EFI "8-stack" kits
Inglese EFI system for SB Chevy - (Inglese p/n NG4006E)
$4099.95
Inglese EFI system for SB Ford- (Inglese p/n NG4008E)
$4099.95
Inglese EFI system for Ford Windsor - (Inglese p/n NG4010E)
$4099.95

Base kit contents: Intake manifold, throttle body assembly, FAST EZ EFIkit (ECU, programmer, sensors and wiring)

 

 
Inglese EFI base kit
Inglese EFI system for SB Chevy - (Inglese p/n NG4006)
$5199.95
Inglese EFI system for SB Ford- (Inglese p/n NG4008)
$5199.95

Base kit contents: Intake manifold, throttle body assembly, FAST XFI 2.0 kit (ECU, sensors and wiring) and a FAST XFI dual sync distributor. efisupply.com will also provide a custom baseline calibration at no additional charge.

 

Radiused aluminum inlet stacks (for use with inglese EFI manifold)
50mm Radiused inlet stacks, set of 8- (Inglese p/n NG4015-8)
$419.95
 
FAST Precision Flow Gen IV fuel injectors (for use w/ base kit)
39 lb/hr (409.5cc/min) Injectors, set of 8 (applications up to 600hp)
$275.28
50 lb/hr (525cc/min) Injectors, set of 8 (applications up to 800hp)
$396.24
65 lb/hr (682.5cc/min) Injectors, set of 8 (applications up to 1000hp)
$396.24

We'll provide addtional part number and price information for these new systems as it becomes available. Please feel free to direct product inquiries to our technical staff at tech@efisupply.com.

{body}